Interior · Expertise
Fireplaces & Hearths
The one surface built for heat.
A fireplace is where a room’s metal has to be honest. Heat finds every shortcut in the making, and the surface people sit closest to is the one that shows it.
Metal near a fire is doing two jobs. The surround and the hearth tray are architectural — they frame the opening and finish the floor and wall around it. The fire panel and the basket are working parts — they sit in the heat, and they are made from thicker material, formed rather than folded, and finished in a way that will not lift or discolour.
Blackened steel is the traditional choice for the working parts because it has nowhere to go: it is already the colour heat would make it. Brass and bronze are used for the surround and the tray, where they are warm to the eye and stay outside the range that would move a finish.
The hearth tray is more engineering than it looks. It has to sit flat on a floor that may not be, take the weight of the basket and the fuel, drain if it is ever washed, and meet the stone or tile around it with a clean line rather than a bead of sealant.
Ornament belongs on the surround and nowhere else. A cast relief, a hand-beaten face or a fluted profile on the surround is the tradition; on the fire panel it fills with soot and cannot be cleaned.
Working parts and architectural parts
The distinction that decides everything here is which pieces the fire actually touches. A basket, a back panel and a grate live in the heat and are made accordingly: heavier gauge, a finish that is the metal itself rather than something on it, and joints that expect to expand. The surround, the fender and the hearth tray live beside the heat, and they can carry the finishes the rest of the room has — a patinated bronze, a hand-beaten brass — because they will never get hot enough to move them.
Mixing the two is the common mistake: an elegant coated surround that extends into the opening and blisters in its first winter. Draw the line where the heat is, and put the ornament on the cool side of it.
Where it is used
- Fireplace surrounds in brass, bronze and blackened steel
- Fire panels and back plates for the opening
- Fire baskets and grates
- Formed hearth trays and fenders
- Log stores and fireside furniture
- Surrounds for gas and bio-ethanol fires
Photographs
Fireplaces we have made
From the workshop and from finished interiors. Click a picture to see it larger.
Applications
Where it goes
Product catalogue
Fireplaces: what we make
Questions & answers
Questions about fireplaces
Which metal goes nearest the fire?
For the parts the fire touches — the basket, the back panel, the grate — blackened steel, made heavy and finished as the metal itself rather than something applied to it. Brass and bronze are used for the surround, the fender and the hearth tray, which sit beside the heat rather than in it and can carry the finishes the rest of the room has.
Can a coated or patinated surround extend into the opening?
It should stop at the line where the heat begins. A coating inside the opening blisters in its first winter; a patina moves. Ornament — cast relief, hand-beating, a fluted profile — belongs on the cool side of that line, and the working parts inside it are plain, heavy and honest.
More interior work
Often specified together
Start a project
Have something extraordinary in mind?
Send a drawing, a sketch, or a photograph of something close to it. We will tell you what is buildable, what it costs and how long it takes.