Gates
Sliding and swing gates
Entrance gates in metal, sliding or swing, ready for automation: louvred, laser-cut, studded and clad designs.
- Metals
- Brass, copper
- Finishes
- Antique
- Sizes
- Made to measure
- Made
- To your drawing, in our Delhi workshop
Where it goes
About this piece
A gate is the first metalwork a visitor touches. We make sliding and swing gates sized for the drive, with frames strong enough for automation and finishes for the weather.
Designs include louvres with brass bands, laser-cut patterns, studded copper and panelled bronze.
Made to measure: drawn to your space, then cut, formed and finished in our Delhi workshop.
Metals & finishes
What it can be made in
Each finish is approved on a physical sample of your metal before production.
Finishes
Questions & answers
Questions about sliding and swing gates
Can a gate be made ready for automation later?
Yes. Even if the motor comes later, the gate can be made with the stiffness, the mounting points and the cable route a motor needs. That is much easier than adapting a finished gate.
How do you stop a large metal gate from sagging?
By the design of the frame and the hinges or track. A swing gate needs a rigid frame and hinges sized for its weight; a sliding gate runs on a track or a cantilever. Sagging comes from a frame too light for its size, so the frame is designed first.
Which finish lasts outdoors on a gate?
On mild steel, a proper protective coating on every surface and edge. Brass and copper cladding weather naturally and darken, which suits some homes. We recommend the finish with the gate's exposure in mind and explain the care it needs.
Start a project
Have something extraordinary in mind?
Send a drawing, a sketch, or a photograph of something close to it. We will tell you what is buildable, what it costs and how long it takes.