Finishes · Compare
Compare finishes side by side
Choose two to four finishes. A finish is always approved on a physical sample of your metal, so ask for samples of the ones you like.
Swipe sideways to see every finish.
 |  |  |  | |
|---|---|---|---|---|
| Family | Textured | Textured | Patinated | Textured |
| How it looks | Brushed swirls, directional grains and figured patterns worked into the sheet by hand and by machine — a finish that appears to move as you walk past it, because the grain catches light from one direction and not another. | Design bitten into the surface, producing fine detail and artwork that cannot be achieved mechanically. | A surface deliberately aged — mottled, darkened and worn back in places — so that new metal reads as if it has been in the building for decades. | Raised pattern pressed into the sheet, from geometric repeats to bespoke ornamental artwork. |
| Metals | Brass, copper, stainless steel | Stainless steel, brass | Brass, copper, mild steel | Brass, copper, stainless steel |
| Where it suits | Indoors | Indoors and outdoors | Indoors | Indoors and outdoors |
| Worth knowing | The pattern is set by the sheet, so the layout of panels is decided with the pattern — a swirl cut through by a joint reads as a mistake. | Shallow by nature, so it wears where hands and feet pass — a wall or a panel, not a counter or a step. | No two panels are the same, which is the point. | The pattern repeats at the size of the tool, so a very large field shows the repeat. |
| Looking after it | Wipe along the grain, never across it, with a soft cloth. | Mild detergent and a soft cloth. | Wax or a clear coat holds the effect; dust it, and wipe with a damp cloth. | Dust settles in the recesses; a soft brush clears it. |
| Next step | Ask for a sample | Ask for a sample | Ask for a sample | Ask for a sample |
Start a project
Have something extraordinary in mind?
Send a drawing, a sketch, or a photograph of something close to it. We will tell you what is buildable, what it costs and how long it takes.