Finishes · Compare
Compare finishes side by side
Choose two to four finishes. A finish is always approved on a physical sample of your metal, so ask for samples of the ones you like.
Swipe sideways to see every finish.
 |  |  |  | |
|---|---|---|---|---|
| Family | Textured | Textured | Polished | Textured |
| How it looks | A worked surface of controlled dents that breaks reflection into hundreds of small highlights. | Brushed swirls, directional grains and figured patterns worked into the sheet by hand and by machine — a finish that appears to move as you walk past it, because the grain catches light from one direction and not another. | A non-directional swirled grain that scatters light. | Formed entirely by hand. |
| Metals | Brass, copper, bronze | Brass, copper, stainless steel | Stainless steel, brass | Brass, copper |
| Where it suits | Indoors and outdoors | Indoors | Indoors and outdoors | Indoors and outdoors |
| Worth knowing | The dents hold dust and, outside, water. | The pattern is set by the sheet, so the layout of panels is decided with the pattern — a swirl cut through by a joint reads as a mistake. | Hard to carry cleanly around a tight curve, so it suits flat and gently formed panels. | No two panels are the same, and that is the reason to choose it — a sample approves a character and a range, not a match. |
| Looking after it | A soft brush lifts dust from the dents; a damp cloth for marks. | Wipe along the grain, never across it, with a soft cloth. | Wipe in any direction — there is no grain to respect, which is why it hides scuffs better than any other polished surface. | As for hammered: a soft brush, a damp cloth, nothing abrasive. |
| Next step | Ask for a sample | Ask for a sample | Ask for a sample | Ask for a sample |
Start a project
Have something extraordinary in mind?
Send a drawing, a sketch, or a photograph of something close to it. We will tell you what is buildable, what it costs and how long it takes.