Finishes · Compare
Compare finishes side by side
Choose two to four finishes. A finish is always approved on a physical sample of your metal, so ask for samples of the ones you like.
Swipe sideways to see every finish.
![]() | ![]() | ![]() | ![]() | |
|---|---|---|---|---|
| Family | Textured | Textured | Coated | Cast |
| How it looks | A worked surface of controlled dents that breaks reflection into hundreds of small highlights. | Formed entirely by hand. | Brass, gold, champagne, rose gold, copper, bronze, gun metal, black nickel and antique brass tones, plus oxidised and custom colour coatings — the way to put a warm metal’s colour on stainless steel, aluminium or mild steel. | Deep three-dimensional panels and medallions cast from a pattern, then hand-finished. |
| Metals | Brass, copper, bronze | Brass, copper | Stainless steel, aluminium, mild steel | Brass, bronze, aluminium |
| Where it suits | Indoors and outdoors | Indoors and outdoors | Indoors and outdoors | Indoors and outdoors |
| Worth knowing | The dents hold dust and, outside, water. | No two panels are the same, and that is the reason to choose it — a sample approves a character and a range, not a match. | A scratch through a PVD or coated surface is through the colour, and it cannot be touched up invisibly — the panel is refinished or replaced. | A pattern has to be made before anything is cast, so a one-off medallion carries the cost of its tooling. |
| Looking after it | A soft brush lifts dust from the dents; a damp cloth for marks. | As for hammered: a soft brush, a damp cloth, nothing abrasive. | Mild soap and water, soft cloth, nothing abrasive and no strong cleaners — the colour is a thin layer and is kept by not attacking it. | A soft brush for the relief, a damp cloth for the face. |
| Next step | Ask for a sample | Ask for a sample | Ask for a sample | Ask for a sample |
Start a project
Have something extraordinary in mind?
Send a drawing, a sketch, or a photograph of something close to it. We will tell you what is buildable, what it costs and how long it takes.




