Finishes · Compare
Compare finishes side by side
Choose two to four finishes. A finish is always approved on a physical sample of your metal, so ask for samples of the ones you like.
Swipe sideways to see every finish.
 |  |  |  | |
|---|---|---|---|---|
| Family | Cast | Textured | Textured | Polished |
| How it looks | Deep three-dimensional panels and medallions cast from a pattern, then hand-finished. | Formed entirely by hand. | Brushed swirls, directional grains and figured patterns worked into the sheet by hand and by machine — a finish that appears to move as you walk past it, because the grain catches light from one direction and not another. | Softer and more open than hairline, with a matt reflection that sits comfortably beside stone and timber. |
| Metals | Brass, bronze, aluminium | Brass, copper | Brass, copper, stainless steel | All metals |
| Where it suits | Indoors and outdoors | Indoors and outdoors | Indoors | Indoors and outdoors |
| Worth knowing | A pattern has to be made before anything is cast, so a one-off medallion carries the cost of its tooling. | No two panels are the same, and that is the reason to choose it — a sample approves a character and a range, not a match. | The pattern is set by the sheet, so the layout of panels is decided with the pattern — a swirl cut through by a joint reads as a mistake. | Small repairs blend better than on hairline but a damaged area is still re-brushed across the whole face. |
| Looking after it | A soft brush for the relief, a damp cloth for the face. | As for hammered: a soft brush, a damp cloth, nothing abrasive. | Wipe along the grain, never across it, with a soft cloth. | Along the grain, mild detergent, soft cloth. |
| Next step | Ask for a sample | Ask for a sample | Ask for a sample | Ask for a sample |
Start a project
Have something extraordinary in mind?
Send a drawing, a sketch, or a photograph of something close to it. We will tell you what is buildable, what it costs and how long it takes.