Compare

Compare finishes side by side

Choose two to four finishes. A finish is always approved on a physical sample of your metal, so ask for samples of the ones you like.

Swipe sideways to see every finish.

	Vibration	Hammered	Etched	Distressed
Family	Polished	Textured	Textured	Patinated
How it looks	A non-directional swirled grain that scatters light.	A worked surface of controlled dents that breaks reflection into hundreds of small highlights.	Design bitten into the surface, producing fine detail and artwork that cannot be achieved mechanically.	A surface deliberately aged — mottled, darkened and worn back in places — so that new metal reads as if it has been in the building for decades.
Metals	Stainless steel, brass	Brass, copper, bronze	Stainless steel, brass	Brass, copper, mild steel
Where it suits	Indoors and outdoors	Indoors and outdoors	Indoors and outdoors	Indoors
Worth knowing	Hard to carry cleanly around a tight curve, so it suits flat and gently formed panels.	The dents hold dust and, outside, water.	Shallow by nature, so it wears where hands and feet pass — a wall or a panel, not a counter or a step.	No two panels are the same, which is the point.
Looking after it	Wipe in any direction — there is no grain to respect, which is why it hides scuffs better than any other polished surface.	A soft brush lifts dust from the dents; a damp cloth for marks.	Mild detergent and a soft cloth.	Wax or a clear coat holds the effect; dust it, and wipe with a damp cloth.
Next step	Ask for a sample	Ask for a sample	Ask for a sample	Ask for a sample