Compare

Compare finishes side by side

Choose two to four finishes. A finish is always approved on a physical sample of your metal, so ask for samples of the ones you like.

Swipe sideways to see every finish.

	Vibration	Hammered	Distressed	Embossed
Family	Polished	Textured	Patinated	Textured
How it looks	A non-directional swirled grain that scatters light.	A worked surface of controlled dents that breaks reflection into hundreds of small highlights.	A surface deliberately aged — mottled, darkened and worn back in places — so that new metal reads as if it has been in the building for decades.	Raised pattern pressed into the sheet, from geometric repeats to bespoke ornamental artwork.
Metals	Stainless steel, brass	Brass, copper, bronze	Brass, copper, mild steel	Brass, copper, stainless steel
Where it suits	Indoors and outdoors	Indoors and outdoors	Indoors	Indoors and outdoors
Worth knowing	Hard to carry cleanly around a tight curve, so it suits flat and gently formed panels.	The dents hold dust and, outside, water.	No two panels are the same, which is the point.	The pattern repeats at the size of the tool, so a very large field shows the repeat.
Looking after it	Wipe in any direction — there is no grain to respect, which is why it hides scuffs better than any other polished surface.	A soft brush lifts dust from the dents; a damp cloth for marks.	Wax or a clear coat holds the effect; dust it, and wipe with a damp cloth.	Dust settles in the recesses; a soft brush clears it.
Next step	Ask for a sample	Ask for a sample	Ask for a sample	Ask for a sample