Compare

Compare finishes side by side

Choose two to four finishes. A finish is always approved on a physical sample of your metal, so ask for samples of the ones you like.

Swipe sideways to see every finish.

	Special effects	Distressed	Etched	Hand-beaten
Family	Textured	Patinated	Textured	Textured
How it looks	Brushed swirls, directional grains and figured patterns worked into the sheet by hand and by machine — a finish that appears to move as you walk past it, because the grain catches light from one direction and not another.	A surface deliberately aged — mottled, darkened and worn back in places — so that new metal reads as if it has been in the building for decades.	Design bitten into the surface, producing fine detail and artwork that cannot be achieved mechanically.	Formed entirely by hand.
Metals	Brass, copper, stainless steel	Brass, copper, mild steel	Stainless steel, brass	Brass, copper
Where it suits	Indoors	Indoors	Indoors and outdoors	Indoors and outdoors
Worth knowing	The pattern is set by the sheet, so the layout of panels is decided with the pattern — a swirl cut through by a joint reads as a mistake.	No two panels are the same, which is the point.	Shallow by nature, so it wears where hands and feet pass — a wall or a panel, not a counter or a step.	No two panels are the same, and that is the reason to choose it — a sample approves a character and a range, not a match.
Looking after it	Wipe along the grain, never across it, with a soft cloth.	Wax or a clear coat holds the effect; dust it, and wipe with a damp cloth.	Mild detergent and a soft cloth.	As for hammered: a soft brush, a damp cloth, nothing abrasive.
Next step	Ask for a sample	Ask for a sample	Ask for a sample	Ask for a sample