Compare

Compare finishes side by side

Choose two to four finishes. A finish is always approved on a physical sample of your metal, so ask for samples of the ones you like.

Swipe sideways to see every finish.

	PVD & coatings	Cast & relief	Etched	Distressed
Family	Coated	Cast	Textured	Patinated
How it looks	Brass, gold, champagne, rose gold, copper, bronze, gun metal, black nickel and antique brass tones, plus oxidised and custom colour coatings — the way to put a warm metal’s colour on stainless steel.	Deep three-dimensional panels and medallions cast from a pattern, then hand-finished.	Design bitten into the surface, producing fine detail and artwork that cannot be achieved mechanically.	A surface deliberately aged — mottled, darkened and worn back in places — so that new metal reads as if it has been in the building for decades.
Metals	Stainless steel	Brass, bronze, aluminium	Stainless steel, brass	Brass, copper, mild steel
Where it suits	Indoors and outdoors	Indoors and outdoors	Indoors and outdoors	Indoors
Worth knowing	A scratch through a PVD or coated surface is through the colour, and it cannot be touched up invisibly — the panel is refinished or replaced.	A pattern has to be made before anything is cast, so a one-off medallion carries the cost of its tooling.	Shallow by nature, so it wears where hands and feet pass — a wall or a panel, not a counter or a step.	No two panels are the same, which is the point.
Looking after it	Mild soap and water, soft cloth, nothing abrasive and no strong cleaners — the colour is a thin layer and is kept by not attacking it.	A soft brush for the relief, a damp cloth for the face.	Mild detergent and a soft cloth.	Wax or a clear coat holds the effect; dust it, and wipe with a damp cloth.
Next step	Ask for a sample	Ask for a sample	Ask for a sample	Ask for a sample